Tag: raspberrypi

Raspberry pi 3 CSI camera with motion /dev/video0

There are a number of topics on the web, about getting a modified version of motion (motion-mmcal) to work with raspberry pi v2.1 CSI camera.

A simpler method is to expose the camera interface through the standard video 4 linux kernel interface /dev/video0.

This can be achieved by simply enabling the video 4 linux kernel module and installing the standard motion.

Install motion

Enable the kernel module on boot

Load the module without reboot

Start service as normal


Raspberry pi 3 disable red and green lights

Disabling the lights on raspberry pi has been documented a number of times on the web.
If differs from model to model, however the following method just sets the brightness to zero and should work on all models.

Modify your /etc/rc.local too like the following